Package: phyloseq

Version: 1.24.2

Command: /home/biocbuild/bbs-3.7-bioc/R/bin/R CMD check --install=check:phyloseq.install-out.txt --library=/home/biocbuild/bbs-3.7-bioc/R/library --no-vignettes --timings phyloseq_1.24.2.tar.gz

StartedAt: 2018-10-16 02:42:03 -0400 (Tue, 16 Oct 2018)

EndedAt: 2018-10-16 02:46:01 -0400 (Tue, 16 Oct 2018)

EllapsedTime: 237.5 seconds

RetCode: 0

Status:  OK

CheckDir: phyloseq.Rcheck

Warnings: 0

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.7-bioc/R/bin/R CMD check --install=check:phyloseq.install-out.txt --library=/home/biocbuild/bbs-3.7-bioc/R/library --no-vignettes --timings phyloseq_1.24.2.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.7-bioc/meat/phyloseq.Rcheck’
* using R version 3.5.1 Patched (2018-07-12 r74967)
* using platform: x86_64-pc-linux-gnu (64-bit)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘phyloseq/DESCRIPTION’ ... OK
* this is package ‘phyloseq’ version ‘1.24.2’
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .travis.yml
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘phyloseq’ can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... OK
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
DPCoA: no visible global function definition for ‘as.dist’
chunkReOrder: no visible global function definition for ‘tail’
chunkReOrder: no visible global function definition for ‘head’
export_env_file: no visible global function definition for
  ‘write.table’
export_mothur_dist: no visible global function definition for ‘as.dist’
export_mothur_dist: no visible global function definition for
  ‘write.table’
fastUniFrac: no visible global function definition for ‘combn’
fastUniFrac: no visible global function definition for ‘as.dist’
import_RDP_otu: no visible global function definition for ‘read.table’
import_env_file: no visible global function definition for ‘read.table’
import_mothur_constaxonomy: no visible global function definition for
  ‘read.table’
import_mothur_dist: no visible global function definition for ‘as.dist’
import_mothur_groups: no visible global function definition for
  ‘read.table’
import_mothur_shared: no visible global function definition for
  ‘read.table’
import_qiime_otu_tax: no visible global function definition for ‘:=’
import_qiime_otu_tax: no visible binding for global variable ‘Consensus
  Lineage’
import_qiime_otu_tax: no visible binding for global variable ‘#OTU ID’
import_qiime_sample_data: no visible global function definition for
  ‘read.table’
import_uparse: no visible global function definition for ‘:=’
import_uparse: no visible binding for global variable ‘count’
import_uparse: no visible binding for global variable ‘queryString’
import_uparse: no visible binding for global variable ‘queryID’
import_uparse: no visible binding for global variable ‘Classification’
import_uparse: no visible global function definition for
  ‘dcast.data.table’
import_uparse: no visible binding for global variable ‘OTULabel’
import_usearch_uc: no visible global function definition for ‘:=’
import_usearch_uc: no visible binding for global variable ‘read’
microbio_me_qiime: no visible global function definition for
  ‘download.file’
microbio_me_qiime: no visible global function definition for ‘unzip’
microbio_me_qiime: no visible global function definition for ‘untar’
nodeplotboot : <anonymous>: no visible global function definition for
  ‘complete.cases’
nodeplotboot : <anonymous>: no visible binding for global variable ‘x’
nodeplotboot : <anonymous>: no visible binding for global variable ‘y’
nodeplotdefault : <anonymous>: no visible binding for global variable
  ‘x’
nodeplotdefault : <anonymous>: no visible binding for global variable
  ‘y’
nodeplotdefault : <anonymous>: no visible binding for global variable
  ‘label’
ordinate: no visible global function definition for ‘as.formula’
plot_clusgap: no visible binding for global variable ‘k’
plot_clusgap: no visible binding for global variable ‘gap’
plot_clusgap: no visible binding for global variable ‘SE.sim’
plot_heatmap: no visible global function definition for
  ‘capture.output’
plot_heatmap: no visible binding for global variable ‘Sample’
plot_heatmap: no visible binding for global variable ‘OTU’
plot_heatmap: no visible binding for global variable ‘Abundance’
plot_net : vertex_layout: no visible binding for global variable ‘x’
plot_net : link_layout: no visible binding for global variable ‘x’
plot_net : link_layout: no visible binding for global variable ‘y’
plot_net: no visible binding for global variable ‘x’
plot_net: no visible binding for global variable ‘y’
plot_net: no visible binding for global variable ‘xend’
plot_net: no visible binding for global variable ‘yend’
plot_network: no visible binding for global variable ‘x’
plot_network: no visible binding for global variable ‘y’
plot_richness: no visible binding for global variable ‘value’
plot_richness: no visible binding for global variable ‘se’
plot_scree: no visible binding for global variable ‘axis’
plot_scree: no visible binding for global variable ‘eigenvalue’
plot_tree: no visible binding for global variable ‘xleft’
plot_tree: no visible binding for global variable ‘xright’
plot_tree: no visible binding for global variable ‘y’
plot_tree: no visible binding for global variable ‘x’
plot_tree: no visible binding for global variable ‘vmin’
plot_tree: no visible binding for global variable ‘vmax’
plot_tree: no visible binding for global variable ‘OTU’
plot_tree: no visible binding for global variable ‘label’
plot_tree: no visible binding for global variable ‘Abundance’
plot_tree: no visible binding for global variable ‘Sample’
plot_tree: no visible global function definition for ‘:=’
plot_tree: no visible binding for global variable ‘h.adj.index’
plot_tree: no visible binding for global variable ‘xdodge’
plot_tree: no visible binding for global variable ‘xfartiplab’
plot_tree: no visible binding for global variable ‘.SD’
rp.joint.fill: no visible global function definition for ‘relevel’
tip_glom: no visible global function definition for ‘as.dist’
tip_glom: no visible global function definition for ‘cutree’
tip_glom: no visible global function definition for ‘as.hclust’
tree_layout: no visible global function definition for ‘:=’
tree_layout: no visible binding for global variable ‘OTU’
tree_layout: no visible binding for global variable ‘V2’
tree_layout: no visible binding for global variable ‘xleft’
tree_layout: no visible binding for global variable ‘V1’
tree_layout: no visible binding for global variable ‘xright’
tree_layout: no visible binding for global variable ‘y’
tree_layout: no visible binding for global variable ‘x’
tree_layout: no visible binding for global variable ‘label’
tree_layout: no visible global function definition for ‘J’
tree_layout: no visible binding for global variable ‘vmin’
tree_layout: no visible binding for global variable ‘vmax’
JSD,matrix: no visible global function definition for ‘combn’
JSD,matrix: no visible binding for global variable ‘i’
JSD,matrix: no visible global function definition for ‘as.dist’
capscale.phyloseq,phyloseq-formula-character: no visible global
  function definition for ‘as.formula’
capscale.phyloseq,phyloseq-formula-dist: no visible global function
  definition for ‘as.formula’
cca.phyloseq,phyloseq-formula: no visible global function definition
  for ‘as.formula’
distance,phyloseq-character: no visible global function definition for
  ‘as.dist’
merge_phyloseq_pair,sample_data-sample_data : <anonymous>: no visible
  binding for global variable ‘X0’
merge_samples,sample_data: no visible global function definition for
  ‘aggregate’
plot_phyloseq,phyloseq: no visible binding for global variable
  ‘esophagus’
Undefined global functions or variables:
  #OTU ID .SD := Abundance Classification Consensus Lineage J OTU
  OTULabel SE.sim Sample V1 V2 X0 aggregate as.dist as.formula
  as.hclust axis capture.output combn complete.cases count cutree
  dcast.data.table download.file eigenvalue esophagus gap h.adj.index
  head i k label queryID queryString read read.table relevel se tail
  untar unzip value vmax vmin write.table x xdodge xend xfartiplab
  xleft xright y yend
Consider adding
  importFrom("graphics", "axis")
  importFrom("stats", "aggregate", "as.dist", "as.formula", "as.hclust",
             "complete.cases", "cutree", "relevel")
  importFrom("utils", "capture.output", "combn", "download.file", "head",
             "read.table", "tail", "untar", "unzip", "write.table")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of ‘data’ directory ... OK
* checking data for non-ASCII characters ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking installed files from ‘inst/doc’ ... OK
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU or elapsed time > 5s
             user system elapsed
plot_heatmap 5.78  0.012   5.793
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat-phyloseq.R’
 OK
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 2 NOTEs
See
  ‘/home/biocbuild/bbs-3.7-bioc/meat/phyloseq.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.7-bioc/R/bin/R CMD INSTALL phyloseq
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/bbs-3.7-bioc/R/library’
* installing *source* package ‘phyloseq’ ...
** R
** data
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
   ‘phyloseq-FAQ.Rmd’ using ‘UTF-8’ 
   ‘phyloseq-analysis.Rmd’ 
   ‘phyloseq-basics.Rmd’ 
   ‘phyloseq-mixture-models.Rmd’ 
** testing if installed package can be loaded
* DONE (phyloseq)

R version 3.5.1 Patched (2018-07-12 r74967) -- "Feather Spray"
Copyright (C) 2018 The R Foundation for Statistical Computing
Platform: x86_64-pc-linux-gnu (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library("testthat")
> packageVersion("phyloseq")
[1] '1.24.2'
> # As suggested for opt-out option on testing by users, recommended by CRAN
> # http://adv-r.had.co.nz/Testing.html
> # Previously, best practice was to put all test files in inst/tests and ensure that R CMD check ran them by putting the following code in tests/test-all.R:  
> # library(testthat)
> # library(yourpackage)
> # test_package("yourpackage")
> # Now, recommended practice is to put your tests in tests/testthat, and ensure R CMD check runs them by putting the following code in tests/test-all.R:
> # library(testthat)
> # test_check("yourpackage")
> # The advantage of this new structure is that the user has control over whether or not tests are installed using the –install-tests parameter to R CMD install, or INSTALL_opts = c(“–install-tests”) argument to install.packages(). I’m not sure why you wouldn’t want to install the tests, but now you have the flexibility as requested by CRAN maintainers.
> test_check("phyloseq")
Loading required package: phyloseq
Found biom-format file, now parsing it... 
Done parsing biom... 
Importing Sample Metdadata from mapping file...
Merging the imported objects... 
Successfully merged, phyloseq-class created. 
 Returning... 
Found biom-format file, now parsing it... 
Done parsing biom... 
Importing Sample Metdadata from mapping file...
Merging the imported objects... 
Successfully merged, phyloseq-class created. 
 Returning... 
Reading `ucfile` into memory and parsing into table 
Initially read 100 entries. 
... Now removing unassigned OTUs (* or NA)... 
Removed 7 entries that had no OTU assignment. 
A total of 93 will be assigned to the OTU table.
Processing otu/tax file...
Reading file into memory prior to parsing...
Detecting first header line...
Header is on line 2  
Converting input file to a table...
Defining OTU table... 
Parsing taxonomy table...
Processing phylogenetic tree...
 /home/biocbuild/bbs-3.7-bioc/R/library/phyloseq/extdata/GP_tree_rand_short.newick.gz ...
Processing map file...
Processing otu/tax file...
Reading file into memory prior to parsing...
Detecting first header line...
Header is on line 2  
Converting input file to a table...
Defining OTU table... 
Parsing taxonomy table...
Processing phylogenetic tree...
 /home/biocbuild/bbs-3.7-bioc/R/library/phyloseq/extdata/GP_tree_rand_short.newick.gz ...
Processing Reference Sequences...
══ testthat results  ═══════════════════════════════════════════════════════════
OK: 613 SKIPPED: 0 FAILED: 0
> 
> proc.time()
   user  system elapsed 
 66.552   0.596  66.784 

name	user	system	elapsed
DPCoA	2.628	0.072	2.812
JSD	0.000	0.000	0.001
UniFrac-methods	0.080	0.000	0.081
access	0	0	0
assign-otu_table	0.000	0.000	0.001
assign-phy_tree	0.032	0.000	0.031
assign-sample_data	0.124	0.004	0.148
assign-sample_names	0.004	0.004	0.007
assign-tax_table	0.000	0.004	0.001
assign-taxa_are_rows	0.000	0.000	0.003
assign-taxa_names	0.004	0.000	0.006
build_tax_table	0.008	0.000	0.010
capscale-phyloseq-methods	0.612	0.000	0.612
cca-rda-phyloseq-methods	0.000	0.000	0.001
chunkReOrder	0.000	0.000	0.001
data-GlobalPatterns	1.148	0.008	1.157
data-enterotype	1.344	0.004	1.353
data-esophagus	0.404	0.000	0.404
data-soilrep	0.776	0.040	0.816
distance	0.216	0.036	1.033
distanceMethodList	0.000	0.000	0.001
envHash2otu_table	0.000	0.000	0.002
estimate_richness	0.036	0.004	0.040
export_env_file	0.000	0.000	0.001
export_mothur_dist	0.100	0.016	0.114
extract-methods	0.008	0.000	0.008
filter_taxa	1.364	0.108	1.474
filterfun_sample	0.012	0.000	0.014
gapstat_ord	1.340	0.016	1.356
genefilter_sample-methods	0.000	0.000	0.001
get.component.classes	0.000	0.000	0.001
get_sample-methods	0.004	0.000	0.003
get_taxa-methods	0.004	0.000	0.003
get_taxa_unique	0.188	0.004	0.192
get_variable	0.152	0.000	0.151
getslots.phyloseq	0.156	0.004	0.161
import	0	0	0
import_RDP_otu	0.972	0.000	0.983
import_biom	0.164	0.000	0.165
import_env_file	0	0	0
import_mothur	0.004	0.000	0.001
import_mothur_dist	0	0	0
import_pyrotagger_tab	0	0	0
import_qiime	0.696	0.000	0.714
import_qiime_otu_tax	0.624	0.028	0.652
import_qiime_sample_data	0.012	0.000	0.012
import_uparse	0	0	0
import_usearch_uc	0.016	0.000	0.013
index_reorder	0.000	0.000	0.001
intersect_taxa	0	0	0
make_network	1.968	0.012	1.983
merge_phyloseq	0.000	0.000	0.001
merge_phyloseq_pair-methods	0.000	0.000	0.001
merge_samples-methods	0.600	0.016	0.619
merge_taxa-methods	0.052	0.000	0.053
microbio_me_qiime	1.484	0.120	1.618
mt-methods	1.220	0.004	1.227
nodeplotblank	0.520	0.004	0.369
nodeplotboot	0.000	0.000	0.002
nodeplotdefault	0	0	0
nsamples-methods	0.016	0.000	0.020
ntaxa-methods	0.004	0.000	0.003
ordinate	0.000	0.000	0.001
otu_table-methods	0.000	0.000	0.001
parseTaxonomy-functions	0.004	0.000	0.002
phy_tree-methods	0.156	0.008	0.163
phyloseq	0.028	0.000	0.028
phyloseq_to_deseq2	2.936	0.196	3.142
phyloseq_to_metagenomeSeq	1.476	0.008	1.487
plot_bar	2.124	0.112	2.243
plot_clusgap	2.764	0.052	2.830
plot_heatmap	5.780	0.012	5.793
plot_net	2.916	0.004	2.922
plot_network	1.728	0.004	1.732
plot_ordination	0.616	0.000	0.614
plot_phyloseq-methods	0.232	0.000	0.234
plot_richness	2.920	0.020	2.944
plot_scree	1.404	0.004	1.407
plot_tree	0.64	0.00	0.64
prune_samples-methods	0.392	0.004	0.395
prune_taxa-methods	0.036	0.000	0.036
psmelt	0.828	0.008	0.836
rank_names	0.016	0.004	0.023
rarefy_even_depth	0.072	0.000	0.070
read_tree	0.016	0.000	0.017
read_tree_greengenes	0.008	0.000	0.013
reconcile_categories	0.000	0.000	0.001
refseq-methods	0.152	0.004	0.155
rm_outlierf	0.012	0.000	0.015
sample_data-methods	0.044	0.004	0.049
sample_names-methods	0.000	0.000	0.002
sample_sums	0.020	0.004	0.027
sample_variables	0.016	0.004	0.023
show-methods	0	0	0
splat.phyloseq.objects	0	0	0
subset_ord_plot	0.000	0.000	0.001
subset_samples-methods	0.000	0.000	0.001
subset_taxa-methods	0	0	0
tax_glom	0	0	0
tax_table-methods	0.000	0.000	0.001
taxa_names-methods	0.02	0.00	0.02
taxa_sums	0.024	0.004	0.030
threshrank	1.984	0.424	2.408
threshrankfun	0.048	0.000	0.045
tip_glom	0.620	0.000	0.622
topf	0.008	0.000	0.011
topk	0.012	0.000	0.011
topp	0.012	0.000	0.010
transformcounts	0.076	0.000	0.078
transpose-methods	0.544	0.288	0.835
tree_layout	0.484	0.000	0.485