Package: GenomicFeatures

Version: 1.39.2

Command: /Library/Frameworks/R.framework/Versions/Current/Resources/bin/R CMD check --install=check:GenomicFeatures.install-out.txt --library=/Library/Frameworks/R.framework/Versions/Current/Resources/library --no-vignettes --timings GenomicFeatures_1.39.2.tar.gz

StartedAt: 2020-01-16 04:49:18 -0500 (Thu, 16 Jan 2020)

EndedAt: 2020-01-16 05:09:14 -0500 (Thu, 16 Jan 2020)

EllapsedTime: 1195.6 seconds

RetCode: 1

Status:  ERROR

CheckDir: GenomicFeatures.Rcheck

Warnings: NA

##############################################################################
##############################################################################
###
### Running command:
###
###   /Library/Frameworks/R.framework/Versions/Current/Resources/bin/R CMD check --install=check:GenomicFeatures.install-out.txt --library=/Library/Frameworks/R.framework/Versions/Current/Resources/library --no-vignettes --timings GenomicFeatures_1.39.2.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/Users/biocbuild/bbs-3.11-bioc/meat/GenomicFeatures.Rcheck’
* using R Under development (unstable) (2019-12-14 r77572)
* using platform: x86_64-apple-darwin15.6.0 (64-bit)
* using session charset: UTF-8
* using option ‘--no-vignettes’
* checking for file ‘GenomicFeatures/DESCRIPTION’ ... OK
* this is package ‘GenomicFeatures’ version ‘1.39.2’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... NOTE
Depends: includes the non-default packages:
  'BiocGenerics', 'S4Vectors', 'IRanges', 'GenomeInfoDb',
  'GenomicRanges', 'AnnotationDbi'
Adding so many packages to the search path is excessive and importing
selectively is preferable.
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .BBSoptions
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘GenomicFeatures’ can be installed ... OK
* checking installed package size ... OK
* checking package directory ... OK
* checking ‘build’ directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
':::' calls which should be '::':
  ‘S4Vectors:::duplicatedIntegerPairs’ ‘S4Vectors:::matchIntegerPairs’
  ‘S4Vectors:::orderIntegerPairs’
  See the note in ?`:::` about the use of this operator.
Unexported objects imported by ':::' calls:
  ‘biomaRt:::martBM’ ‘biomaRt:::martDataset’ ‘biomaRt:::martHost’
  ‘rtracklayer:::resourceDescription’ ‘rtracklayer:::ucscTableOutputs’
  See the note in ?`:::` about the use of this operator.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... OK
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking sizes of PDF files under ‘inst/doc’ ... OK
* checking files in ‘vignettes’ ... OK
* checking examples ... ERROR
Running examples in ‘GenomicFeatures-Ex.R’ failed
The error most likely occurred in:

> base::assign(".ptime", proc.time(), pos = "CheckExEnv")
> ### Name: makeTxDbFromBiomart
> ### Title: Make a TxDb object from annotations available on a BioMart
> ###   database
> ### Aliases: makeTxDbFromBiomart getChromInfoFromBiomart
> 
> ### ** Examples
> 
> ## ---------------------------------------------------------------------
> ## A. BASIC USAGE
> ## ---------------------------------------------------------------------
> 
> ## We can use listDatasets() from the biomaRt package to list the
> ## datasets available in the "ENSEMBL_MART_ENSEMBL" BioMart database:
> library(biomaRt)
> listMarts(host="www.ensembl.org")
               biomart               version
1 ENSEMBL_MART_ENSEMBL      Ensembl Genes 99
2   ENSEMBL_MART_MOUSE      Mouse strains 99
3     ENSEMBL_MART_SNP  Ensembl Variation 99
4 ENSEMBL_MART_FUNCGEN Ensembl Regulation 99
> mart <- useMart(biomart="ENSEMBL_MART_ENSEMBL", host="www.ensembl.org")
> datasets <- listDatasets(mart)
> head(datasets)
                     dataset                                  description
1   acalliptera_gene_ensembl             Eastern happy genes (fAstCal1.2)
2 acarolinensis_gene_ensembl               Anole lizard genes (AnoCar2.0)
3  acchrysaetos_gene_ensembl              Golden eagle genes (bAquChr1.2)
4  acitrinellus_gene_ensembl               Midas cichlid genes (Midas_v5)
5  amelanoleuca_gene_ensembl                        Panda genes (ailMel1)
6    amexicanus_gene_ensembl Mexican tetra genes (Astyanax_mexicanus-2.0)
                 version
1             fAstCal1.2
2              AnoCar2.0
3             bAquChr1.2
4               Midas_v5
5                ailMel1
6 Astyanax_mexicanus-2.0
> subset(datasets, grepl("elegans", dataset, ignore.case=TRUE))
                 dataset                             description  version
25 celegans_gene_ensembl Caenorhabditis elegans genes (WBcel235) WBcel235
> 
> ## Retrieve the full transcript dataset for Worm:
> txdb1 <- makeTxDbFromBiomart(dataset="celegans_gene_ensembl")
Download and preprocess the 'transcripts' data frame ... OK
Download and preprocess the 'chrominfo' data frame ... FAILED! (=> skipped)
Download and preprocess the 'splicings' data frame ... OK
Download and preprocess the 'genes' data frame ... OK
Prepare the 'metadata' data frame ... Error in function (type, msg, asError = TRUE)  : 
  Server denied you to change to the given directory
Calls: makeTxDbFromBiomart ... ls_ftp_url -> getURL -> curlPerform -> <Anonymous> -> fun
Execution halted
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘run_unitTests.R’
 ERROR
Running the tests in ‘tests/run_unitTests.R’ failed.
Last 13 lines of output:
  
  Error in BiocGenerics:::testPackage("GenomicFeatures") : 
    unit tests failed for package GenomicFeatures
  Calls: <Anonymous> -> <Anonymous>
  In addition: Warning messages:
  1: In .get_cds_IDX(mcols0$type, mcols0$phase) :
    The "phase" metadata column contains non-NA values for features of type
    exon. This information was ignored.
  2: In .get_cds_IDX(mcols0$type, mcols0$phase) :
    The "phase" metadata column contains non-NA values for features of type
    stop_codon. This information was ignored.
  3: In .get_cds_IDX(mcols0$type, mcols0$phase) :
    The "phase" metadata column contains non-NA values for features of type
    stop_codon. This information was ignored.
  Execution halted
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ... SKIPPED
* checking re-building of vignette outputs ... SKIPPED
* checking PDF version of manual ... OK
* DONE

Status: 2 ERRORs, 3 NOTEs
See
  ‘/Users/biocbuild/bbs-3.11-bioc/meat/GenomicFeatures.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /Library/Frameworks/R.framework/Versions/Current/Resources/bin/R CMD INSTALL GenomicFeatures
###
##############################################################################
##############################################################################


* installing to library ‘/Library/Frameworks/R.framework/Versions/4.0/Resources/library’
* installing *source* package ‘GenomicFeatures’ ...
** using staged installation
** R
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (GenomicFeatures)

R Under development (unstable) (2019-12-14 r77572) -- "Unsuffered Consequences"
Copyright (C) 2019 The R Foundation for Statistical Computing
Platform: x86_64-apple-darwin15.6.0 (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> require("GenomicFeatures") || stop("unable to load GenomicFeatures package")
Loading required package: GenomicFeatures
Loading required package: BiocGenerics
Loading required package: parallel

Attaching package: 'BiocGenerics'

The following objects are masked from 'package:parallel':

    clusterApply, clusterApplyLB, clusterCall, clusterEvalQ,
    clusterExport, clusterMap, parApply, parCapply, parLapply,
    parLapplyLB, parRapply, parSapply, parSapplyLB

The following objects are masked from 'package:stats':

    IQR, mad, sd, var, xtabs

The following objects are masked from 'package:base':

    Filter, Find, Map, Position, Reduce, anyDuplicated, append,
    as.data.frame, basename, cbind, colnames, dirname, do.call,
    duplicated, eval, evalq, get, grep, grepl, intersect, is.unsorted,
    lapply, mapply, match, mget, order, paste, pmax, pmax.int, pmin,
    pmin.int, rank, rbind, rownames, sapply, setdiff, sort, table,
    tapply, union, unique, unsplit, which, which.max, which.min

Loading required package: S4Vectors
Loading required package: stats4

Attaching package: 'S4Vectors'

The following object is masked from 'package:base':

    expand.grid

Loading required package: IRanges
Loading required package: GenomeInfoDb
Loading required package: GenomicRanges
Loading required package: AnnotationDbi
Loading required package: Biobase
Welcome to Bioconductor

    Vignettes contain introductory material; view with
    'browseVignettes()'. To cite Bioconductor, see
    'citation("Biobase")', and for packages 'citation("pkgname")'.

[1] TRUE
> GenomicFeatures:::.test()
Loading required package: BSgenome
Loading required package: Biostrings
Loading required package: XVector

Attaching package: 'Biostrings'

The following object is masked from 'package:base':

    strsplit

Loading required package: rtracklayer
Download and preprocess the 'transcripts' data frame ... OK
Download and preprocess the 'chrominfo' data frame ... FAILED! (=> skipped)
Timing stopped at: 1.157 0.067 27.35
Error in S4Vectors:::extract_data_frame_rows(chrominfo, keep_idx) : 
  is.data.frame(x) is not TRUE
In addition: Warning messages:
1: In valid.GenomicRanges.seqinfo(x, suggest.trim = TRUE) :
  GRanges object contains 3 out-of-bound ranges located on sequences a,
  b, and c. Note that ranges located on a sequence whose length is
  unknown (NA) or on a circular sequence are not considered out-of-bound
  (use seqlengths() and isCircular() to get the lengths and circularity
  flags of the underlying sequences). You can use trim() to trim these
  ranges. See ?`trim,GenomicRanges-method` for more information.
2: In valid.GenomicRanges.seqinfo(x, suggest.trim = TRUE) :
  GRanges object contains 1 out-of-bound range located on sequence c.
  Note that ranges located on a sequence whose length is unknown (NA) or
  on a circular sequence are not considered out-of-bound (use
  seqlengths() and isCircular() to get the lengths and circularity flags
  of the underlying sequences). You can use trim() to trim these ranges.
  See ?`trim,GenomicRanges-method` for more information.
3: In valid.GenomicRanges.seqinfo(x, suggest.trim = TRUE) :
  GRanges object contains 1 out-of-bound range located on sequence c.
  Note that ranges located on a sequence whose length is unknown (NA) or
  on a circular sequence are not considered out-of-bound (use
  seqlengths() and isCircular() to get the lengths and circularity flags
  of the underlying sequences). You can use trim() to trim these ranges.
  See ?`trim,GenomicRanges-method` for more information.
4: In valid.GenomicRanges.seqinfo(x, suggest.trim = TRUE) :
  GRanges object contains 4 out-of-bound ranges located on sequences 1,
  2, 3, and 4. Note that ranges located on a sequence whose length is
  unknown (NA) or on a circular sequence are not considered out-of-bound
  (use seqlengths() and isCircular() to get the lengths and circularity
  flags of the underlying sequences). You can use trim() to trim these
  ranges. See ?`trim,GenomicRanges-method` for more information.
Import genomic features from the file as a GRanges object ... OK
Prepare the 'metadata' data frame ... OK
Make the TxDb object ... OK
Import genomic features from the file as a GRanges object ... OK
Prepare the 'metadata' data frame ... OK
Make the TxDb object ... OK
Import genomic features from the file as a GRanges object ... OK
Prepare the 'metadata' data frame ... OK
Make the TxDb object ... OK
Import genomic features from the file as a GRanges object ... OK
Prepare the 'metadata' data frame ... OK
Make the TxDb object ... OK
'select()' returned 1:1 mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:1 mapping between keys and columns
'select()' returned 1:1 mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:1 mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:many mapping between keys and columns
'select()' returned 1:1 mapping between keys and columns


RUNIT TEST PROTOCOL -- Thu Jan 16 05:09:03 2020 
*********************************************** 
Number of test functions: 75 
Number of errors: 1 
Number of failures: 0 

 
1 Test Suite : 
GenomicFeatures RUnit Tests - 75 test functions, 1 error, 0 failures
ERROR in test_makeTxDbFromBiomart: Error in S4Vectors:::extract_data_frame_rows(chrominfo, keep_idx) : 
  is.data.frame(x) is not TRUE

Test files with failing tests

   test_makeTxDbFromBiomart.R 
     test_makeTxDbFromBiomart 


Error in BiocGenerics:::testPackage("GenomicFeatures") : 
  unit tests failed for package GenomicFeatures
Calls: <Anonymous> -> <Anonymous>
In addition: Warning messages:
1: In .get_cds_IDX(mcols0$type, mcols0$phase) :
  The "phase" metadata column contains non-NA values for features of type
  exon. This information was ignored.
2: In .get_cds_IDX(mcols0$type, mcols0$phase) :
  The "phase" metadata column contains non-NA values for features of type
  stop_codon. This information was ignored.
3: In .get_cds_IDX(mcols0$type, mcols0$phase) :
  The "phase" metadata column contains non-NA values for features of type
  stop_codon. This information was ignored.
Execution halted

name	user	system	elapsed
DEFAULT_CIRC_SEQS	0.000	0.000	0.001
FeatureDb-class	0.974	0.009	0.984
TxDb-class	1.302	0.163	1.467
as-format-methods	3.860	0.438	4.326
coordinate-mapping-methods	127.834	9.713	142.386
coverageByTranscript	40.962	14.051	55.122
disjointExons	0	0	0
exonicParts	78.358	8.968	88.245
extractTranscriptSeqs	28.890	1.073	30.572
extractUpstreamSeqs	3.076	0.898	4.619
features	0.116	0.003	0.120
getPromoterSeq-methods	1.216	0.063	1.280
id2name	0.420	0.007	0.430
makeFeatureDbFromUCSC	69.258	4.620	150.357
makeTxDb	0.143	0.005	0.148