Setup
1. Introduction
The geom_facet function provided in the ggtree package (Yu et al. 2017) was designed to align associated graphs to the tree (Yu et al. 2018). It only works with rectangular, roundrect, ellipse and slanted layouts to present tree data on external panels. To extend ggtree to present associated data on the outer rings of phylogenetic tree in circular, fan and radial layouts, we developed ggtreeExtra, which is able to align associated graphs with a tree in rectangular, circular, fan and radial layouts.
The ggtreeExtra package provides a function, geom_fruit, to align graphs to a tree. The associated graphs will align at different positions of the external panels of the tree. We also developed geom_fruit_list to add multiple layers at the same external panel of tree. Furthermore, axis of an external layer can be added using the axis.params=list(axis="x",...) in geom_fruit. Background grid lines of an external layer can be added using the grid.params=list() in geom_fruit. These functions are based on ggplot2 and support using grammar of graphics (Wickham 2016). See also Chapter10 of the online book.
2. Install
You can use the following commands to install it
# for devel
if(!requireNamespace("remotes", quietly=TRUE)){
install.packages("remotes")
}
remotes::install_github("YuLab-SMU/ggtreeExtra")
# for release
if (!requireNamespace("BiocManager", quietly=TRUE))
install.packages("BiocManager")
## BiocManager::install("BiocUpgrade") ## you may need this
BiocManager::install("ggtreeExtra")3. Usage
To demonstrate the usages of the package, we use a tree file downloaded from plotTree with simulated associated datasets. All the simulated datasets contain one column of taxa labels of the tree.
3.1 add single layer
# The path of tree file.
trfile <- system.file("extdata", "tree.nwk", package="ggtreeExtra")
# The path of file to plot tip point.
tippoint1 <- system.file("extdata", "tree_tippoint_bar.csv", package="ggtreeExtra")
# The path of first layer outside of tree.
ring1 <- system.file("extdata", "first_ring_discrete.csv", package="ggtreeExtra")
# The path of second layer outside of tree.
ring2 <- system.file("extdata", "second_ring_continuous.csv", package="ggtreeExtra")
# The tree file was imported using read.tree. If you have other tree format files, you can use corresponding functions from treeio package to read it.
tree <- read.tree(trfile)
# This dataset will to be plotted point and bar.
dat1 <- read.csv(tippoint1)
knitr::kable(head(dat1))| ID | Location | Length | Group | Abundance |
|---|---|---|---|---|
| DE0655_HCMC_2001 | HK | 0.1786629 | Yes | 12.331055 |
| MS0111_HCMC_1996 | HK | 0.2105236 | Yes | 9.652052 |
| MS0063_HCMC_1995 | HK | 1.4337983 | Yes | 11.584822 |
| DE0490_HCMC_2000 | HK | 0.3823731 | Yes | 7.893231 |
| DE0885_HCMC_2001 | HK | 0.8478901 | Yes | 12.117232 |
| DE0891_HCMC_2001 | HK | 1.5038646 | Yes | 10.819734 |
| ID | Pos | Type |
|---|---|---|
| DE0846_HCMC_2001 | 8 | type2 |
| MS0034_HCMC_1995 | 8 | type2 |
| EG1017_HCMC_2009 | 6 | type2 |
| KH18_HCMC_2009 | 5 | type2 |
| 10365_HCMC_2010 | 7 | type2 |
| EG1021_HCMC_2009 | 1 | type1 |
| ID | Type2 | Alpha |
|---|---|---|
| MS0004_HCMC_1995 | p3 | 0.2256195 |
| DE1150_HCMC_2002 | p2 | 0.2222086 |
| MS0048_HCMC_1995 | p2 | 0.1881510 |
| HUE57_HCMC_2010 | p3 | 0.1939088 |
| DE1486_HCMC_2002 | p2 | 0.2018493 |
| DE1165_HCMC_2002 | p3 | 0.1812997 |
# The format of the datasets is the long shape for ggplot2. If you have short shape dataset,
# you can use `melt` of `reshape2` or `pivot_longer` of `tidyr` to convert it.
# We use ggtree to create fan layout tree.
p <- ggtree(tree, layout="fan", open.angle=10, size=0.5)
#> Scale for 'y' is already present. Adding another scale for 'y', which will
#> replace the existing scale.
p
## Next, we can use %<+% of ggtree to add annotation dataset to tree.
#p1 <- p %<+% dat1
#p1
## We use geom_star to add point layer outside of tree.
#p2 <- p1 +
# geom_star(
# mapping=aes(fill=Location, size=Length, starshape=Group),
# starstroke=0.2
# ) +
# scale_size_continuous(
# range=c(1, 3),
# guide=guide_legend(
# keywidth=0.5,
# keyheight=0.5,
# override.aes=list(starshape=15),
# order=2)
# ) +
# scale_fill_manual(
# values=c("#F8766D", "#C49A00", "#53B400", "#00C094", "#00B6EB", "#A58AFF", "#FB61D7"),
# guide="none" # don't show the legend.
# ) +
# scale_starshape_manual(
# values=c(1, 15),
# guide=guide_legend(
# keywidth=0.5, # adjust width of legend
# keyheight=0.5, # adjust height of legend
# order=1 # adjust the order of legend for multiple legends.
# ),
# na.translate=FALSE # to remove the NA legend.
# )
#p2
# Or if you don't use %<+% to import annotation dataset, instead of `data` parameter of `geom_fruit`.
# You should specify the column contained tip labels to y axis of `mapping`, here is `y=ID`.
# the `position` parameter was set to `identity` to add the points on the tip nodes.
p2 <- p +
geom_fruit(
data=dat1,
geom=geom_star,
mapping=aes(y=ID, fill=Location, size=Length, starshape=Group),
position="identity",
starstroke=0.2
) +
scale_size_continuous(
range=c(1, 3), # the range of size.
guide=guide_legend(
keywidth=0.5,
keyheight=0.5,
override.aes=list(starshape=15),
order=2
)
) +
scale_fill_manual(
values=c("#F8766D", "#C49A00", "#53B400", "#00C094", "#00B6EB", "#A58AFF", "#FB61D7"),
guide="none"
) +
scale_starshape_manual(
values=c(1, 15),
guide=guide_legend(
keywidth=0.5,
keyheight=0.5,
order=1
)
)
p2
# Next, we will add a heatmap layer on the outer ring of p2 using `geom_tile` of `ggplot2`.
# Since we want to map some variable of dataset to the `fill` aesthetics of `geom_tile`, but
# the `fill` of p2 had been mapped. So I need use `new_scale_fill` of `ggnewscale` package to initialize it.
p3 <- p2 +
new_scale_fill() +
geom_fruit(
data=dat2,
geom=geom_tile,
mapping=aes(y=ID, x=Pos, fill=Type),
offset=0.08, # The distance between external layers, default is 0.03 times of x range of tree.
pwidth=0.25 # width of the external layer, default is 0.2 times of x range of tree.
) +
scale_fill_manual(
values=c("#339933", "#dfac03"),
guide=guide_legend(keywidth=0.5, keyheight=0.5, order=3)
)
p3
# You can also add heatmap layer for continuous values.
p4 <- p3 +
new_scale_fill() +
geom_fruit(
data=dat3,
geom=geom_tile,
mapping=aes(y=ID, x=Type2, alpha=Alpha, fill=Type2),
pwidth=0.15,
axis.params=list(
axis="x", # add axis text of the layer.
text.angle=-45, # the text angle of x-axis.
hjust=0 # adjust the horizontal position of text of axis.
)
) +
scale_fill_manual(
values=c("#b22222", "#005500", "#0000be", "#9f1f9f"),
guide=guide_legend(keywidth=0.5, keyheight=0.5, order=4)
) +
scale_alpha_continuous(
range=c(0, 0.4), # the range of alpha
guide=guide_legend(keywidth=0.5, keyheight=0.5, order=5)
)
# Then add a bar layer outside of the tree.
p5 <- p4 +
new_scale_fill() +
geom_fruit(
data=dat1,
geom=geom_bar,
mapping=aes(y=ID, x=Abundance, fill=Location), #The 'Abundance' of 'dat1' will be mapped to x
pwidth=0.4,
stat="identity",
orientation="y", # the orientation of axis.
axis.params=list(
axis="x", # add axis text of the layer.
text.angle=-45, # the text size of axis.
hjust=0 # adjust the horizontal position of text of axis.
),
grid.params=list() # add the grid line of the external bar plot.
) +
scale_fill_manual(
values=c("#F8766D", "#C49A00", "#53B400", "#00C094", "#00B6EB", "#A58AFF", "#FB61D7"),
guide=guide_legend(keywidth=0.5, keyheight=0.5, order=6)
) +
theme(#legend.position=c(0.96, 0.5), # the position of legend.
legend.background=element_rect(fill=NA), # the background of legend.
legend.title=element_text(size=7), # the title size of legend.
legend.text=element_text(size=6), # the text size of legend.
legend.spacing.y = unit(0.02, "cm") # the distance of legends (y orientation).
)
p5
3.2 add multiple layers on the same position.
In the section, we simulated a tree with several associated datasets, and used geom_fruit_list to add multiple layers at the same external panel of the tree.
# To reproduce.
set.seed(1024)
# generate a tree contained 100 tip labels.
tr <- rtree(100)
# generate three datasets, which are the same except the third column name.
dt <- data.frame(id=tr$tip.label, value=abs(rnorm(100)), group=c(rep("A",50),rep("B",50)))
df <- dt
dtf <- dt
colnames(df)[[3]] <- "group2"
colnames(dtf)[[3]] <- "group3"
# plot tree
p <- ggtree(tr, layout="fan", open.angle=0)
#> Scale for 'y' is already present. Adding another scale for 'y', which will
#> replace the existing scale.
p
# the first ring.
p1 <- p +
geom_fruit(
data=dt,
geom=geom_bar,
mapping=aes(y=id, x=value, fill=group),
orientation="y",
stat="identity"
) +
new_scale_fill()
p1
# the second ring
# geom_fruit_list is a list, which first element must be layer of geom_fruit.
p2 <- p1 +
geom_fruit_list(
geom_fruit(
data = df,
geom = geom_bar,
mapping = aes(y=id, x=value, fill=group2),
orientation = "y",
stat = "identity"
),
scale_fill_manual(values=c("blue", "red")), # To map group2
new_scale_fill(), # To initialize fill scale.
geom_fruit(
data = dt,
geom = geom_star,
mapping = aes(y=id, x=value, fill=group),
size = 2.5,
color = NA,
starstroke = 0
)
) +
new_scale_fill()
p2
# The third ring
p3 <- p2 +
geom_fruit(
data=dtf,
geom=geom_bar,
mapping = aes(y=id, x=value, fill=group3),
orientation = "y",
stat = "identity"
) +
scale_fill_manual(values=c("#00AED7", "#009E73"))
p3
4. Need helps?
If you have any questions/issues, please visit github issue tracker. You also can post to google group. Users are highly recommended to subscribe to the mailing list.
5. Session information
Here is the output of sessionInfo() on the system on which this document was compiled:
#> R version 4.1.2 (2021-11-01)
#> Platform: x86_64-pc-linux-gnu (64-bit)
#> Running under: Ubuntu 20.04.4 LTS
#>
#> Matrix products: default
#> BLAS: /home/biocbuild/bbs-3.14-bioc/R/lib/libRblas.so
#> LAPACK: /home/biocbuild/bbs-3.14-bioc/R/lib/libRlapack.so
#>
#> locale:
#> [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
#> [3] LC_TIME=en_GB LC_COLLATE=C
#> [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
#> [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
#> [9] LC_ADDRESS=C LC_TELEPHONE=C
#> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
#>
#> attached base packages:
#> [1] stats graphics grDevices utils datasets methods base
#>
#> other attached packages:
#> [1] ggnewscale_0.4.6 treeio_1.18.1 ggtree_3.2.1 ggplot2_3.3.5
#> [5] ggstar_1.0.3 ggtreeExtra_1.4.2
#>
#> loaded via a namespace (and not attached):
#> [1] prettydoc_0.4.1 tidyselect_1.1.2 xfun_0.30 bslib_0.3.1
#> [5] purrr_0.3.4 lattice_0.20-45 ggfun_0.0.5 colorspace_2.0-3
#> [9] vctrs_0.3.8 generics_0.1.2 htmltools_0.5.2 yaml_2.3.5
#> [13] utf8_1.2.2 gridGraphics_0.5-1 rlang_1.0.2 jquerylib_0.1.4
#> [17] pillar_1.7.0 withr_2.5.0 glue_1.6.2 DBI_1.1.2
#> [21] lifecycle_1.0.1 stringr_1.4.0 munsell_0.5.0 gtable_0.3.0
#> [25] evaluate_0.15 labeling_0.4.2 knitr_1.37 fastmap_1.1.0
#> [29] parallel_4.1.2 fansi_1.0.2 highr_0.9 Rcpp_1.0.8
#> [33] scales_1.1.1 jsonlite_1.8.0 farver_2.1.0 gridExtra_2.3
#> [37] digest_0.6.29 aplot_0.1.2 stringi_1.7.6 dplyr_1.0.8
#> [41] grid_4.1.2 yulab.utils_0.0.4 cli_3.2.0 tools_4.1.2
#> [45] magrittr_2.0.2 sass_0.4.0 lazyeval_0.2.2 patchwork_1.1.1
#> [49] tibble_3.1.6 tidyr_1.2.0 crayon_1.5.0 ape_5.6-2
#> [53] pkgconfig_2.0.3 tidytree_0.3.9 ellipsis_0.3.2 ggplotify_0.1.0
#> [57] assertthat_0.2.1 rmarkdown_2.12 R6_2.5.1 nlme_3.1-155
#> [61] compiler_4.1.26. Reference
Wickham, Hadley. 2016. Ggplot2: Elegant Graphics for Data Analysis. Springer-Verlag New York. https://ggplot2.tidyverse.org.
Yu, Guangchuang, Tommy Tsan-Yuk Lam, Huachen Zhu, and Yi Guan. 2018. “Two Methods for Mapping and Visualizing Associated Data on Phylogeny Using Ggtree.” Molecular Biology and Evolution 35 (2): 3041–3. https://doi.org/10.1093/molbev/msy194.
Yu, Guangchuang, David Smith, Huachen Zhu, Yi Guan, and Tommy Tsan-Yuk Lam. 2017. “Ggtree: An R Package for Visualization and Annotation of Phylogenetic Trees with Their Covariates and Other Associated Data.” Methods in Ecology and Evolution 8 (1): 28–36. https://doi.org/10.1111/2041-210X.12628.