Workflow
Ahmed Mohamed
Precision & Systems Biomedicine, QIMR Berghofer, Australia2020-04-28
Introduction
lipidr implements a series of functions to facilitate inspection, analysis and visualization of targeted lipidomics datasets. lipidr takes exported Skyline CSV as input, allowing for multiple methods to be analyzed together.
Input
lipidr represents Skyline files as SummarizedExperiment objects, which can easily be integrated with a wide variety of Bioconductor packages. Sample annotations, such as sample group or other clinical information can be loaded.
Quality control & visualization
lipidr generates various plots, such as PCA score plots and box plots, for quality control of samples and measured lipids. Normalization methods with and without internal standards are also supported.
Differential Analysis
Differential analysis can be performed using any of the loaded clinical variables, which can be readily visualized as volcano plots. A novel lipid set enrichment analysis (LSEA) is implemented to detect preferential enrichment of certain lipid classes, total chain lengths or unsaturation patterns. Plots for the visualization of enrichment results are also implemented.
This vignette provides a step by step guide for downstream analysis of targeted lipidomics data, exported from Skyline.
Installation
From Bioconductor
In R console, type:
if (!requireNamespace("BiocManager", quietly=TRUE))
install.packages("BiocManager")
BiocManager::install("lipidr") From GitHub using devtools
In R console, type:
library(devtools)
install_github("ahmohamed/lipidr")Analysis Workflow
Example Study
In this workflow, we will use serum lipidomics data from mice fed a normal or high-fat diet. Mice were fed a normal or high-fat diet (Diet column) and had access to normal drinking water or drinking water containing the bile acid deoxycholic acid (BileAcid column). Lipid peaks were integrated using Skyline and exported as CSV files.
Data Import & manipulation
Exporting files from Skyline
Integrated peaks should be exported from each Skyline file through File => Export => Report. Selecting Transition Results ensures that necessary information is exported from Skyline. Otherwise, you should ensure that peak Area or Height or a similar measure is exported. Regardless of the measure you choose for intensity, you can use lipidr workflow.
Replicates should either be exported, or the Pivot Replicate Name option must be used.
Reading files into R
lipidr can read multiple CSV files from different analysis methods together. Using our example dataset, three Skyline CSV files are used as input to read.skyline.
datadir = system.file("extdata", package="lipidr")
filelist = list.files(datadir, "data.csv", full.names = TRUE) # all csv files
d = read_skyline(filelist)
print(d)## class: LipidomicsExperiment
## dim: 279 58
## metadata(2): summarized dimnames
## assays(3): Retention Time Area Background
## rownames(279): 1 2 ... 278 279
## rowData names(26): filename Molecule ... total_cs Class
## colnames(58): S1A S2A ... TQC_11 TQC_12
## colData names(0):Datasets are represented in R as SummarizedExperiments to facilitate integration other Bioconductor packages.
Adding sample annotation
Sample annotation can be prepared in Excel and saved as CSV. The table should have at least two columns, first indicating sample names and other columns indicating clinical variables.
clinical_file = system.file("extdata", "clin.csv", package="lipidr")
d = add_sample_annotation(d, clinical_file)
colData(d)## DataFrame with 58 rows and 3 columns
## group Diet BileAcid
## <character> <character> <character>
## S1A NormalDiet_water Normal water
## S2A NormalDiet_water Normal water
## S3A NormalDiet_water Normal water
## S4A NormalDiet_water Normal water
## S5A NormalDiet_water Normal water
## ... ... ... ...
## TQC_8 QC QC QC
## TQC_9 QC QC QC
## TQC_10 QC QC QC
## TQC_11 QC QC QC
## TQC_12 QC QC QCData subsetting
It is helpful to imagine LipidomicsExperiment object as a table with lipid molecules as rows and samples as columns. We can subset this table by selecting specific rows and columns. The general syntax is d[rows, cols].
In the example below we select the first 10 transitions and 10 samples. We can check the rowData and colData.
d_subset = d[1:10, 1:10]
rowData(d_subset)## DataFrame with 10 rows and 26 columns
## filename Molecule Precursor.Mz Precursor.Charge Product.Mz
## <character> <character> <numeric> <integer> <numeric>
## 1 A1_data.csv PE 32:0 692.5 1 551.5
## 2 A1_data.csv PE 32:1 690.5 1 549.5
## 3 A1_data.csv PE 32:2 688.5 1 547.5
## 4 A1_data.csv PE 34:1 718.5 1 577.5
## 5 A1_data.csv PE 34:1 NEG 716.5 1 196.0
## 6 A1_data.csv PE 34:2 716.5 1 575.5
## 7 A1_data.csv PE 34:3 714.5 1 573.5
## 8 A1_data.csv PE 36:0 748.6 1 607.6
## 9 A1_data.csv PE 36:1 746.6 1 605.6
## 10 A1_data.csv PE 36:1 NEG 744.6 1 196.0
## Product.Charge clean_name ambig not_matched istd class_stub
## <integer> <factor> <logical> <logical> <logical> <character>
## 1 1 PE 32:0 FALSE FALSE FALSE PE
## 2 1 PE 32:1 FALSE FALSE FALSE PE
## 3 1 PE 32:2 FALSE FALSE FALSE PE
## 4 1 PE 34:1 FALSE FALSE FALSE PE
## 5 1 PE 34:1 FALSE FALSE FALSE PE
## 6 1 PE 34:2 FALSE FALSE FALSE PE
## 7 1 PE 34:3 FALSE FALSE FALSE PE
## 8 1 PE 36:0 FALSE FALSE FALSE PE
## 9 1 PE 36:1 FALSE FALSE FALSE PE
## 10 1 PE 36:1 FALSE FALSE FALSE PE
## chain1 l_1 s_1 chain2 l_2 s_2 chain3
## <character> <integer> <integer> <character> <integer> <integer> <character>
## 1 32:0 32 0 NA NA
## 2 32:1 32 1 NA NA
## 3 32:2 32 2 NA NA
## 4 34:1 34 1 NA NA
## 5 34:1 34 1 NA NA
## 6 34:2 34 2 NA NA
## 7 34:3 34 3 NA NA
## 8 36:0 36 0 NA NA
## 9 36:1 36 1 NA NA
## 10 36:1 36 1 NA NA
## l_3 s_3 chain4 l_4 s_4 total_cl total_cs
## <logical> <logical> <character> <logical> <logical> <integer> <integer>
## 1 NA NA NA NA 32 0
## 2 NA NA NA NA 32 1
## 3 NA NA NA NA 32 2
## 4 NA NA NA NA 34 1
## 5 NA NA NA NA 34 1
## 6 NA NA NA NA 34 2
## 7 NA NA NA NA 34 3
## 8 NA NA NA NA 36 0
## 9 NA NA NA NA 36 1
## 10 NA NA NA NA 36 1
## Class
## <character>
## 1 PE
## 2 PE
## 3 PE
## 4 PE
## 5 PE
## 6 PE
## 7 PE
## 8 PE
## 9 PE
## 10 PEcolData(d)## DataFrame with 58 rows and 3 columns
## group Diet BileAcid
## <character> <character> <character>
## S1A NormalDiet_water Normal water
## S2A NormalDiet_water Normal water
## S3A NormalDiet_water Normal water
## S4A NormalDiet_water Normal water
## S5A NormalDiet_water Normal water
## ... ... ... ...
## TQC_8 QC QC QC
## TQC_9 QC QC QC
## TQC_10 QC QC QC
## TQC_11 QC QC QC
## TQC_12 QC QC QCWe can also apply conditional selections (indexing). For example, we can select all quality control samples.
d_qc = d[, d$group == "QC"]
rowData(d_qc)## DataFrame with 279 rows and 26 columns
## filename Molecule Precursor.Mz Precursor.Charge Product.Mz
## <character> <character> <numeric> <integer> <numeric>
## 1 A1_data.csv PE 32:0 692.5 1 551.5
## 2 A1_data.csv PE 32:1 690.5 1 549.5
## 3 A1_data.csv PE 32:2 688.5 1 547.5
## 4 A1_data.csv PE 34:1 718.5 1 577.5
## 5 A1_data.csv PE 34:1 NEG 716.5 1 196.0
## ... ... ... ... ... ...
## 275 F2_data.csv PC(P-40:3) 824.600 1 184.10
## 276 F2_data.csv PC(P-40:4) 822.600 1 184.10
## 277 F2_data.csv PC(P-40:5) 820.600 1 184.10
## 278 F2_data.csv PC(P-40:6) 818.600 1 184.10
## 279 F2_data.csv 15:0-18:1(d7) PC 753.615 1 184.07
## Product.Charge clean_name ambig not_matched istd class_stub
## <integer> <factor> <logical> <logical> <logical> <character>
## 1 1 PE 32:0 FALSE FALSE FALSE PE
## 2 1 PE 32:1 FALSE FALSE FALSE PE
## 3 1 PE 32:2 FALSE FALSE FALSE PE
## 4 1 PE 34:1 FALSE FALSE FALSE PE
## 5 1 PE 34:1 FALSE FALSE FALSE PE
## ... ... ... ... ... ... ...
## 275 1 PCP-40:3 FALSE FALSE FALSE PCP
## 276 1 PCP-40:4 FALSE FALSE FALSE PCP
## 277 1 PCP-40:5 FALSE FALSE FALSE PCP
## 278 1 PCP-40:6 FALSE FALSE FALSE PCP
## 279 1 PC 15:0-18:1(d7) FALSE FALSE TRUE PC
## chain1 l_1 s_1 chain2 l_2 s_2 chain3
## <character> <integer> <integer> <character> <integer> <integer> <character>
## 1 32:0 32 0 NA NA
## 2 32:1 32 1 NA NA
## 3 32:2 32 2 NA NA
## 4 34:1 34 1 NA NA
## 5 34:1 34 1 NA NA
## ... ... ... ... ... ... ... ...
## 275 40:3 40 3 NA NA
## 276 40:4 40 4 NA NA
## 277 40:5 40 5 NA NA
## 278 40:6 40 6 NA NA
## 279 15:0 15 0 18:1 18 1
## l_3 s_3 chain4 l_4 s_4 total_cl total_cs
## <logical> <logical> <character> <logical> <logical> <integer> <integer>
## 1 NA NA NA NA 32 0
## 2 NA NA NA NA 32 1
## 3 NA NA NA NA 32 2
## 4 NA NA NA NA 34 1
## 5 NA NA NA NA 34 1
## ... ... ... ... ... ... ... ...
## 275 NA NA NA NA 40 3
## 276 NA NA NA NA 40 4
## 277 NA NA NA NA 40 5
## 278 NA NA NA NA 40 6
## 279 NA NA NA NA 33 1
## Class
## <character>
## 1 PE
## 2 PE
## 3 PE
## 4 PE
## 5 PE
## ... ...
## 275 PC
## 276 PC
## 277 PC
## 278 PC
## 279 PCcolData(d_qc)## DataFrame with 12 rows and 3 columns
## group Diet BileAcid
## <character> <character> <character>
## TQC_1 QC QC QC
## TQC_2 QC QC QC
## TQC_3 QC QC QC
## TQC_4 QC QC QC
## TQC_5 QC QC QC
## ... ... ... ...
## TQC_8 QC QC QC
## TQC_9 QC QC QC
## TQC_10 QC QC QC
## TQC_11 QC QC QC
## TQC_12 QC QC QCNote that we leave rows index empty (d[,cols]) to select all lipids. We can also subset based on lipid annotations, selecting a specific class for example.
pc_lipids = rowData(d)$Class %in% c("PC", "PCO", "PCP")
d_pc = d[pc_lipids,]
rowData(d_pc)## DataFrame with 82 rows and 26 columns
## filename Molecule Precursor.Mz Precursor.Charge Product.Mz
## <character> <character> <numeric> <integer> <numeric>
## 160 F1_data.csv PC 30:0 706.5 1 184.1
## 161 F1_data.csv PC 30:1 704.5 1 184.1
## 162 F1_data.csv PC 30:2 702.5 1 184.1
## 163 F1_data.csv PC 32:0 734.6 1 184.1
## 164 F1_data.csv PC 32:1 732.6 1 184.1
## ... ... ... ... ... ...
## 275 F2_data.csv PC(P-40:3) 824.600 1 184.10
## 276 F2_data.csv PC(P-40:4) 822.600 1 184.10
## 277 F2_data.csv PC(P-40:5) 820.600 1 184.10
## 278 F2_data.csv PC(P-40:6) 818.600 1 184.10
## 279 F2_data.csv 15:0-18:1(d7) PC 753.615 1 184.07
## Product.Charge clean_name ambig not_matched istd class_stub
## <integer> <factor> <logical> <logical> <logical> <character>
## 160 1 PC 30:0 FALSE FALSE FALSE PC
## 161 1 PC 30:1 FALSE FALSE FALSE PC
## 162 1 PC 30:2 FALSE FALSE FALSE PC
## 163 1 PC 32:0 FALSE FALSE FALSE PC
## 164 1 PC 32:1 FALSE FALSE FALSE PC
## ... ... ... ... ... ... ...
## 275 1 PCP-40:3 FALSE FALSE FALSE PCP
## 276 1 PCP-40:4 FALSE FALSE FALSE PCP
## 277 1 PCP-40:5 FALSE FALSE FALSE PCP
## 278 1 PCP-40:6 FALSE FALSE FALSE PCP
## 279 1 PC 15:0-18:1(d7) FALSE FALSE TRUE PC
## chain1 l_1 s_1 chain2 l_2 s_2 chain3
## <character> <integer> <integer> <character> <integer> <integer> <character>
## 160 30:0 30 0 NA NA
## 161 30:1 30 1 NA NA
## 162 30:2 30 2 NA NA
## 163 32:0 32 0 NA NA
## 164 32:1 32 1 NA NA
## ... ... ... ... ... ... ... ...
## 275 40:3 40 3 NA NA
## 276 40:4 40 4 NA NA
## 277 40:5 40 5 NA NA
## 278 40:6 40 6 NA NA
## 279 15:0 15 0 18:1 18 1
## l_3 s_3 chain4 l_4 s_4 total_cl total_cs
## <logical> <logical> <character> <logical> <logical> <integer> <integer>
## 160 NA NA NA NA 30 0
## 161 NA NA NA NA 30 1
## 162 NA NA NA NA 30 2
## 163 NA NA NA NA 32 0
## 164 NA NA NA NA 32 1
## ... ... ... ... ... ... ... ...
## 275 NA NA NA NA 40 3
## 276 NA NA NA NA 40 4
## 277 NA NA NA NA 40 5
## 278 NA NA NA NA 40 6
## 279 NA NA NA NA 33 1
## Class
## <character>
## 160 PC
## 161 PC
## 162 PC
## 163 PC
## 164 PC
## ... ...
## 275 PC
## 276 PC
## 277 PC
## 278 PC
## 279 PCcolData(d_pc)## DataFrame with 58 rows and 3 columns
## group Diet BileAcid
## <character> <character> <character>
## S1A NormalDiet_water Normal water
## S2A NormalDiet_water Normal water
## S3A NormalDiet_water Normal water
## S4A NormalDiet_water Normal water
## S5A NormalDiet_water Normal water
## ... ... ... ...
## TQC_8 QC QC QC
## TQC_9 QC QC QC
## TQC_10 QC QC QC
## TQC_11 QC QC QC
## TQC_12 QC QC QCFor demonstration purposes, we select only 3 lipids classes, Ceramides (Cer), PhosphatidylCholines (PC) and LysoPhosphatidylCholines (LPC). We also BileAcid treated group from our dataset.
lipid_classes = rowData(d)$Class %in% c("Cer", "PC", "LPC")
groups = d$BileAcid != "DCA"
d = d[lipid_classes, groups]
#QC sample subset
d_qc = d[, d$group == "QC"]Raw Data Quality Check
To ensure data quality, we can look at total lipid intensity as bar chart or distribution of samples as a boxplot.
plot_samples(d, type = "tic", log = TRUE)
We can also look at intensity and retention time distributions for each lipid molecule using plot_molecules(type = boxplot). It is recommended to assess the variation across quality control samples.
plot_molecules(d_qc, "sd", measure = "Retention Time", log = FALSE)
plot_molecules(d_qc, "cv", measure = "Area")
Or intensity distribution within different lipid classes.
plot_lipidclass(d, "boxplot")
Interactive plots
All lipidr plots can be displayed interactive mode if plotly package is installed. Plot interactivity is disabled by default. To enable interactivity, simple call use_interactive_graphics(). You can turn interactivity back off by use_interactive_graphics(interactive=FALSE).
Summarizing transitions
This step is important when more than one transition is measured per lipid molecule. Multiple transitions are summarized into a single value by either taking the average intensity or the one with highest intensity.
d_summarized = summarize_transitions(d, method = "average")Normalization
Probabilistic Quotient Normalization (PQN)
The PQN method determines a dilution factor for each sample by comparing the distribution of quotients between samples and a reference spectrum, followed by sample normalization using this dilution factor.
d_normalized = normalize_pqn(d_summarized, measure = "Area", exclude = "blank", log = TRUE)
plot_samples(d_normalized, "boxplot")
By specifying exclude = "blank", blank runs are automatically detected and excluded from the normalization process.
Internal standard normalization
Internal standard normalization corrects lipid class-specific variations between samples. Lipid classes are normalized using corresponding internal standard(s) of the same lipid class. If no corresponding internal standard is found the average of all measured internal standards is used instead.
d_normalized_istd = normalize_istd(d_summarized, measure = "Area", exclude = "blank", log = TRUE)Multivariate analysis
You can investigate sample variation using either PCA or PCoA (classical MDS).
mvaresults = mva(d_normalized, measure="Area", method="PCA")
plot_mva(mvaresults, color_by="group", components = c(1,2))
Plotting other components is possible by specifying components argument. For example components = c(2,3) plots second and third components.
Supervised multivariate analysis
Supervised multivariate analyses, such as OPLS and OPLS-DA can be performed to determine which lipids are associated with a group (y-variable) of interest. In this example we use “Diet” as grouping, and display the results in a scores plot.
mvaresults = mva(d_normalized, method = "OPLS-DA", group_col = "Diet", groups=c("HighFat", "Normal"))
plot_mva(mvaresults, color_by="group")
We can also plot the loadings and display important lipids contributing to the separation between different (Diet) groups.
plot_mva_loadings(mvaresults, color_by="Class", top.n=10)Alternatively, we can extract top N lipids along with their annotations.
top_lipids(mvaresults, top.n=10)## filename Molecule Precursor.Mz Precursor.Charge clean_name
## 1 F1_data.csv Cer d18:1/C18:0 566.7 1 Cer 18:1/18:0
## 2 F1_data.csv Cer d18:0/C20:0 596.7 1 Cer 18:0/20:0
## 3 F1_data.csv Cer d18:1/C20:0 594.7 1 Cer 18:1/20:0
## 4 F1_data.csv Cer d18:1/C16:0 538.7 1 Cer 18:1/16:0
## 5 F1_data.csv Cer d18:1/C20:1 592.7 1 Cer 18:1/20:1
## 6 F2_data.csv PC(P-36:5) 764.6 1 PCP-36:5
## 7 F2_data.csv PC(O-40:1) 830.6 1 PCO-40:1
## 8 F2_data.csv PC(P-40:0) 830.6 1 PCP-40:0
## 9 F1_data.csv Cer d18:1/C22:3 616.7 1 Cer 18:1/22:3
## 10 F1_data.csv Cer d18:1/C20:2 590.7 1 Cer 18:1/20:2
## ambig not_matched istd class_stub chain1 l_1 s_1 chain2 l_2 s_2 chain3 l_3
## 1 FALSE FALSE FALSE Cer 18:1 18 1 18:0 18 0 NA
## 2 FALSE FALSE FALSE Cer 18:0 18 0 20:0 20 0 NA
## 3 FALSE FALSE FALSE Cer 18:1 18 1 20:0 20 0 NA
## 4 FALSE FALSE FALSE Cer 18:1 18 1 16:0 16 0 NA
## 5 FALSE FALSE FALSE Cer 18:1 18 1 20:1 20 1 NA
## 6 FALSE FALSE FALSE PCP 36:5 36 5 NA NA NA
## 7 FALSE FALSE FALSE PCO 40:1 40 1 NA NA NA
## 8 FALSE FALSE FALSE PCP 40:0 40 0 NA NA NA
## 9 FALSE FALSE FALSE Cer 18:1 18 1 22:3 22 3 NA
## 10 FALSE FALSE FALSE Cer 18:1 18 1 20:2 20 2 NA
## s_3 chain4 l_4 s_4 total_cl total_cs Class molrank
## 1 NA NA NA 36 1 Cer 1.0
## 2 NA NA NA 38 0 Cer 2.0
## 3 NA NA NA 38 1 Cer 3.0
## 4 NA NA NA 34 1 Cer 4.0
## 5 NA NA NA 38 2 Cer 5.0
## 6 NA NA NA 36 5 PC 6.0
## 7 NA NA NA 40 1 PC 7.5
## 8 NA NA NA 40 0 PC 7.5
## 9 NA NA NA 40 4 Cer 9.0
## 10 NA NA NA 38 3 Cer 10.0Differential analysis
This step of the workflow requires the limma package to be installed.
Normalized and log transformed data should be used.
de_results = de_analysis(
data=d_normalized,
HighFat_water - NormalDiet_water,
measure="Area"
)
head(de_results)## Molecule Class total_cl total_cs istd MoleculeId
## 1 Cer d18:0/C16:0 Cer 34 0 FALSE 1
## 2 Cer d18:0/C18:0 Cer 36 0 FALSE 2
## 3 Cer d18:0/C20:0 Cer 38 0 FALSE 3
## 4 Cer d18:0/C22:0 Cer 40 0 FALSE 4
## 5 Cer d18:0/C24:0 Cer 42 0 FALSE 5
## 6 Cer d18:0/C24:1 Cer 42 1 FALSE 6
## contrast logFC AveExpr t P.Value
## 1 HighFat_water - NormalDiet_water 1.699691 11.957712 9.884937 1.823247e-10
## 2 HighFat_water - NormalDiet_water 2.143217 10.376157 14.761687 1.902992e-14
## 3 HighFat_water - NormalDiet_water 1.997993 9.825952 21.336335 1.976278e-18
## 4 HighFat_water - NormalDiet_water 1.390828 12.497122 12.851894 5.102948e-13
## 5 HighFat_water - NormalDiet_water 1.081816 11.884280 9.303129 6.547053e-10
## 6 HighFat_water - NormalDiet_water 1.356113 12.054596 11.452936 7.184205e-12
## adj.P.Val B
## 1 6.003375e-10 13.57936
## 2 1.417631e-13 22.91345
## 3 1.362707e-16 32.17804
## 4 2.460350e-12 19.56839
## 5 1.733044e-09 12.27716
## 6 2.852552e-11 16.87467significant_molecules(de_results)## $`HighFat_water - NormalDiet_water`
## [1] Cer d18:0/C16:0 Cer d18:0/C18:0 Cer d18:0/C20:0 Cer d18:0/C22:0
## [5] Cer d18:0/C24:0 Cer d18:0/C24:1 Cer d18:1/C16:0 Cer d18:1/C16:1
## [9] Cer d18:1/C18:0 Cer d18:1/C18:1 Cer d18:1/C20:0 Cer d18:1/C20:1
## [13] Cer d18:1/C20:2 Cer d18:1/C22:0 Cer d18:1/C22:1 Cer d18:1/C22:2
## [17] Cer d18:1/C22:3 Cer d18:1/C22:5 Cer d18:1/C22:6 Cer d18:1/C24:1
## [21] Cer d18:1/C26:0 Cer d18:2/C20:0 PC 36:5 PC 36:6
## [25] PC 40:2 PC 40:3 PC 40:8 LPC 20:0
## [29] LPC 20:4 LPC 22:0 LPC 26:0 PC(O-34:2)
## [33] PC(O-34:3) PC(O-38:2) PC(O-40:1) PC(P-34:1)
## [37] PC(P-34:2) PC(P-34:3) PC(P-36:5) PC(P-38:0)
## [41] PC(P-38:1) PC(P-40:0)
## 134 Levels: Cer d18:0/C16:0 Cer d18:0/C18:0 Cer d18:0/C20:0 ... PC(P-40:6)We can visualize differential analysis results using volcano plots. In this instance we turn off labeling, due to the large number of significantly altered lipids between conditions.
plot_results_volcano(de_results, show.labels = FALSE)
Complex experimental designs
For more complex experimental designs, where one might deal with factor adjustment or interactions, it is recommended to use the de_design function. Users can either provide a design matrix, or a formula to create one.
# Using formula
de_design(
data=d_normalized,
design = ~ group,
coef="groupHighFat_water",
measure="Area")
# Using design matrix
design = model.matrix(~ group, data=colData(d_normalized))
de_design(
data=d_normalized,
design = design,
coef="groupHighFat_water",
measure="Area")For more details on creating design matrices for different experimental designs, refer to (Limma User Guide)[https://www.bioconductor.org/packages/devel/bioc/vignettes/limma/inst/doc/usersguide.pdf] and (edgeR tutorial)[https://www.bioconductor.org/packages/devel/bioc/vignettes/edgeR/inst/doc/edgeRUsersGuide.pdf].
Enrichment analysis
lipidr automatically generates sets of lipids based on lipid class, total chain length and unsaturation. Measured lipids are then ranked by their fold change, or p-value using results from differential analysis.
enrich_results = lsea(de_results, rank.by = "logFC")
significant_lipidsets(enrich_results)## $`HighFat_water - NormalDiet_water`
## [1] "Class_Cer" "Class_PC"Visualization of enrichment analysis results. The enriched lipid classes and chain lengths are highlighted.
plot_class_enrichment(de_results, significant_lipidsets(enrich_results))
lipidr can also plot fold changes of lipids per class showing total chain lengths and unsaturations. Number on the plot indicate multiple lipids measured with the same chain properties.
plot_chain_distribution(de_results)
Session information
sessionInfo()## R version 4.0.0 (2020-04-24)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 18.04.4 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.11-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.11-bioc/R/lib/libRlapack.so
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_US.UTF-8 LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## attached base packages:
## [1] parallel stats4 stats graphics grDevices utils datasets
## [8] methods base
##
## other attached packages:
## [1] ggplot2_3.3.0 lipidr_2.2.0
## [3] SummarizedExperiment_1.18.0 DelayedArray_0.14.0
## [5] matrixStats_0.56.0 Biobase_2.48.0
## [7] GenomicRanges_1.40.0 GenomeInfoDb_1.24.0
## [9] IRanges_2.22.0 S4Vectors_0.26.0
## [11] BiocGenerics_0.34.0
##
## loaded via a namespace (and not attached):
## [1] tidyselect_1.0.0 fgsea_1.14.0 xfun_0.13
## [4] purrr_0.3.4 lattice_0.20-41 colorspace_1.4-1
## [7] vctrs_0.2.4 htmltools_0.4.0 yaml_2.2.1
## [10] rlang_0.4.5 pillar_1.4.3 glue_1.4.0
## [13] withr_2.2.0 BiocParallel_1.22.0 GenomeInfoDbData_1.2.3
## [16] lifecycle_0.2.0 stringr_1.4.0 zlibbioc_1.34.0
## [19] munsell_0.5.0 gtable_0.3.0 evaluate_0.14
## [22] labeling_0.3 knitr_1.28 forcats_0.5.0
## [25] Rcpp_1.0.4.6 scales_1.1.0 limma_3.44.0
## [28] XVector_0.28.0 farver_2.0.3 gridExtra_2.3
## [31] fastmatch_1.1-0 digest_0.6.25 stringi_1.4.6
## [34] dplyr_0.8.5 ropls_1.20.0 grid_4.0.0
## [37] tools_4.0.0 bitops_1.0-6 magrittr_1.5
## [40] RCurl_1.98-1.2 tibble_3.0.1 crayon_1.3.4
## [43] tidyr_1.0.2 pkgconfig_2.0.3 ellipsis_0.3.0
## [46] Matrix_1.2-18 data.table_1.12.8 assertthat_0.2.1
## [49] rmarkdown_2.1 R6_2.4.1 compiler_4.0.0